M208 Release Display [Firmware] Version 5.6.1 ============= Bug Fixes [ID-Code Synopsis] ---------------------------- 970117-01 Printing may hang if user unplugs printer and plugs it back in again. 970411-00 Unit dies randomly every few days. Additional ---------- Customers may need to do a hard reset after upgrade. Version 5.6.0.5 =============== Bug Fixes [ID-Code Synopsis] ---------------------------- 960612-01 Serial port crashes if receiving data during config changes. 960802-00 Loopback test packet is sent out the UTP port during hardware initialization. 960808-00 Loopback test packet causing units to configure themselves to a junk IP address. Version 5.6.0.4 =============== Bug Fixes [ID-Code Synopsis] ---------------------------- 960209-03 A2PS in the print server doesn't handle LF in text properly. 960308-01 Parallel Port compatibility problem with non-standard printers (ie. C. Itoh dot matrix). 960311-00 Parallel port's ~SLCTIN signal which is permenantly high may cause printing problems. 960510-00 Support for wider range of parallel printers. 960514-03 2MB M208 doesn't work. 960521-00 M208 hangs up and needs a reset to fix things. 960619-00 Watchdog timer doesn't work. 960724-00 igndcd broken for com ports. Technotes [ID-Code Synopsis] ---------------------------- 960702-00 New NPSH commands for 5.6.2 release. --------------------------------------------------- [End of changes]